摄像机预设工具有三个预设，包括摄像机小车，转盘，摄像机，摄像机切换。这三个预设会帮助您实现梦幻般的动画，简化复杂的工作项目。
摄像机小车：以从一个点移动的摄像机到另一个，而不需要一个单独的关键帧。第一模式是点到点模式。这是对起点和终点直接的位置和旋转输入。第二模式是目标模式。此模式将引用两个对象。然后相机这两点继承自己的位置和旋转值之间移动。
转盘摄像头：与转盘设置自旋以连续或单一运动的能力可能永远或一次旋转。您可以设置基于旋转一个简单的易于样条曲线的旋转，也可以检查一个盒子，有旋转旋线。
摄像头切换：您最多可以添加10个摄像头和它们之间循环与动画滑块。这将允许您设置复杂的相机的动画和拍摄快速，轻松和更多！该工具将帮助你专注于你正在看什么，而不是如何你看看吧。

The Think Particle Camera Tools:

The Think Particle Camera Tools preset comes with 3 powerful camera rigs designed to help you setup your animations for wonderful cinematography. The rigs included are the camera dolly, the turntable camera, and the camera switcher. These three presets are going to help you achieve fantastic animations and work smarter through your complex projects.

The Camera Dolly:

CameraRigs_DollyThe Camera Dolly has two modes to move a camera from one point to another without need for a single keyframe. The first mode is the point to point mode. This is for direct Position and Rotation input for start and end points. The second mode is the target mode. This mode will reference two objects. The camera will then move between these two points inheriting their position and rotation values.

The Turntable Camera:

CameraRigs_TurntableThe Turntable Camera will rotate around your scene. With the ability to set the turntable to spin in a continuous or single motion you may rotate forever or once. You can set the rotation to rotate based on an easy ease spline curve or you can check a box and have the rotation spin linearly.

The Camera Switcher:

CameraRigs_SwitcherSwitching between cameras has never been this easy. You can add up to 10 cameras and cycle between them with an animatable slider. This will allow you setup complex camera animations and shots quickly, easily, and more! This tool will help you to focus on what you’re looking at, not how you’re look at it.






上一篇：C4D金属材质预设包(39个) Epic VIP Metal Pack C4D Materials
下一篇：C4D随机性反弹动画预设 Boing!